Discussion:
Site Master
(too old to reply)
Richard Porter
2023-04-09 15:17:20 UTC
Permalink
Recently I've had a problem with !SiteMastr dieing on what looks like a
page with a large number of links (it doesn't show every object). I could
move the poiinter but nothing else so I had to Alt-Break the task.

!SiteMastr doesn't seem to use !Scrap so I assume all the site data are
held inside the task. The Wimpslot is set to 2048 so I'm going to try
increasing it. In the mean time I've removed the offending page while
doing a link check. I'll see what happens.

...

Success. So the moral of the story is 'keep an eye on memory'.
--
Richard Porter
Richard Porter
2023-04-10 09:18:37 UTC
Permalink
Post by Richard Porter
Recently I've had a problem with !SiteMastr dieing on what looks like a
page with a large number of links (it doesn't show every object). I could
move the poiinter but nothing else so I had to Alt-Break the task.
!SiteMastr doesn't seem to use !Scrap so I assume all the site data are
held inside the task. The Wimpslot is set to 2048 so I'm going to try
increasing it. In the mean time I've removed the offending page while
doing a link check. I'll see what happens.
...
Success. So the moral of the story is 'keep an eye on memory'.
Unfortunately not success. I took out the page with over 800 links on it,
increased Wimpsloy by 50% and SiteMastr got to the end, switchd to the
'scanning' window but then ground to a halt. There's no way to get the
report out at that point.

Loading...